Steel Doors

WSI Doors fabricates a wide array of commercial steel doors for any commercial application. Whether it’s security, fire resistance, high traffic or any other custom requirement, WSI is here to assist you.

Resources:

LS SERIES DOORS – Lock Seam 1 3/4” thick

LS Series Doors are designed for standard and heavy duty applications and are made to provide years of maintenance free performance. These doors are perfect for a wide array of applications in commercial, industrial, and institutional buildings. LS Series doors are available in 20 GA, 18 GA, and 16 GA and can be fire rated up to 3 hours.

FIRE RATING: 45 min, 90 min, & 3 hour Fire Rating Available
CORES:

High density honeycomb paper core laminated to door face
Polystyrene / Polyisocyanurate permanently bonded to inside of door skin generating an “R” factor of 6 or 12
Laminated vertical steel stiffeners at 6” on centre: Voids filled with fibreglass insulation

CW Series

  • Edge seams continuously welded
  • Steel stiffeners are projection welded to face sheet at 6” on centre
  • Voids filled with fibreglass insulation 

Other cores available through special order

CONSTRUCTION:1 3/4” inch thick door, continuous, mechanical interlocking edge seam filled with an internal sealant. 16GA inverted top and bottom channels, welded to door face sheets.
Gauges:Available in , 20GA, 18 Ga, 16GA, & 14 GA
Hardware:All doors are reinforced to receive standard 4 1/2” template hinge preps and standard ANSI lock types.

Hinge and Lock Locations

HINGE LOCATION
(from top of door to top of each hinge)
6’8” HEIGHT7’0” HEIGHT
7 3/8”7 3/8”
37 5/16”39 5/16”
67 1/4”71 1/4”
LOCK LOCATION
(from top of door to center of hole)
Lockset Hole39 9/16”43 9/16”
Deadbolt Hole33 9/16”37 9/16”

Door Handling

Rules:

  1. The hand of the door is always determined from the outside.
  2. The outside of an exterior door is the street or entrance side.
  3. The outside of an auditorium door is the corridor or hall side.
  4. The outside of a room is the corridor or hall side.
  5. The outside of a closet door is the room, corridor or hall side.
  6. The outside of a single communicating door is the side from
    which the butts are visible when the door is closed.

HAND OF DOOR:
RIGHT HAND (RH)

HAND OF DOOR:
LEFT HAND
(LH)

HAND OF DOOR:
RIGHT HAND
REVERSE (RHR)

HAND OF DOOR:
LEFT HAND
REVERSE (LHR)

FIRE RATING: 45min, 90min, & 3 hour fire rating available

NOTE: – 20 X 54 MAXIMUM WITH 20 MINUTE FIRE RATING
SEALED UNITS CANNOT BE FIRE RATED – AIR SPACE BETWEEN PANES
HEAT UP FAST AND WILL EXPLODE
NOTE: 90 MIN FIRE RATING MAX 100 SQ FT
NOTE: 45 MIN FIRE RATING MAX 1296 SQ FT, MAX HEIGHT 54″, 6″ FROM LOCKSET
NOTE: FIRE RATING MUST BE SELF CLOSING (CLOSER REQUIRED)